BLUE WAVE SPA WATER BALANCE CHEMICALS

KEEP YOUR pH BALANCED!

Save time and money by using pH Balance to keep pH and alkalinity levels stable in your spa water. Add pH Balance to freshly filled spa water after the pH and alkalinity are initially balanced. This will help to prevent pH and alkalinity levels from bouncing around. Not recommended for areas with hard water.

Dosage: 1 qt. per 500 gallons

RAISES PH TO IDEAL LEVELS!

Balanced water chemistry is the first, most important step to clean, sparkling water. pH levels below 7.2 ppm can cause eye irritation, rapid use of chlorine/bromine, and corrosion. Use Spa Up in appropriate dosages to raise the pH in your spa water to the ideal range of 7.2 to 7.6 ppm.

LOWERS PH TO IDEAL LEVELS!

Balanced water chemistry is the first, most important step to clean, sparkling water. pH levels above 7.6 cause cloudy water and eye irritation; and can reduce chlorine/bromine's effectiveness. Use Spa Down to lower the pH and alkalinity levels in your spa water to the ideal range of 7.2 to 7.6 ppm.

Balanced water chemistry is the first, most important step to clean, sparkling water. Raising alkalinity to the "safe zone" of 80 to 150 ppm makes your pH easier to keep in line and makes your sanitizer work more effectively. Use Spa Alkalinity Up to stop the eye irritation and corrosion that can result when your alkalinity drops below 80 ppm.

Low calcium can cause corrosion of your spa's plumbing and heating, and stain your spa's surface. When the calcium level of your spa water drops below 200 ppm, just add Calcium Hardness Increaser as needed.