Above Ground Pool Wall Foam Kits
Pool wall foam for above ground pools is simply a roll of closed foam cell padding. It's comes in rolls of various lengths depending on the pool size selected. It measures 1/8" thick by 48" tall and the lengths are 60', 80' and 100' long. It's used to keep pool water warmer by adding a layer of insulation to your pool wall. The foam pad also protects your new swimming pool liner from punctures. This is especially true on older swimming pool walls that may now have a rough texture due to corrosion and rust that may now be present.
Adding the pool wall foam to a rough textured pool wall will help smooth out the roughness and keep the liner from coming in contact with coarse surface. Often the rusty wall surface can put small punctures in the vinyl material cause leaks hastening further wall corrosion.
Included In Pool Wall Foam Kits
Each wall foam kit includes enough wall foam for the pool size selected. The kit also comes with the proper amount of Foam Bond adhesive need to ensure a proper installation. We supply only Foam Bond because it's an extremely sticky adhesive and highly recommended over other brand spray adhesives. This spray glue must be applied to a clean dry pool wall to hold the wall foam firmly in place. Pool wall foam kits work with pool walls up to 54 tall as wall foam is not needed under the pool cove and is usually started 1" from the top of the pool wall for best results. Please call our tech support line for assistance if you have any questions.